# This is the "standard" charging config for Mot C1xx phones running
# FreeCalypso fw.  The start threshold is set to "always" on the reasoning
# that if the user connects the charging power source (which is not USB
# and thus not required for computer connection), it means that she
# actually intends to charge the battery, the charge-to voltage is the
# full charge (charge the battery fully before going out), and the
# restart threshold is a reasonable setting so if the phone is left
# plugged into the charger for a long time, the user won't be surprised
# with a battery that has run down significantly after the completion
# of the initial charging cycle.

start-threshold		always
restart-threshold	3900	# mV
charge-to-voltage	4200	# mV
overvoltage		4280	# mV

# For the current settings, keep in mind that C1xx phones use a current
# measurement resistor of 0.15R instead of TI's "canonical" value of 0.20R,
# hence the conversion factor between mA and ADC/DAC numbers changes
# accordingly.  The CI current setting is based on what Motorola's fw
# has been observed to set, but the end current setting is our own.

ci-current		280	# DAC units, about 320 mA
end-current		88	# ADC units, about 100 mA

# Motorola's fw does not seem to use the I2V offset mechanism,
# but we use the same setting as Pirelli.

i2v-offset		0x18	# register setting