Baseband: MS '1' is up, service is limited
Hoàng Mạnh Hùng
hunghm.vn at gmail.com
Tue Apr 16 12:42:04 CEST 2013
Thanks for your support.
I only enabled TX --> still failed
But then, I update libosmocombb, and enable TX --> connect network
successful
Your support is very helpful.
2013/4/15 Pavel Baturko <pabftk at gmail.com>
> As I see your Channel Requests remain unanswered from the network. Are you
> sure that you are using firmware compiled with enabled TX (I do not
> remember if it could be observed from layer1.log)?
> If yes, you can try not to use the ARFCN that is selected by MS
> automatically (in your log - 748DCS) by signal level, but try to stick on
> another ARFCN: e.g. 746DCS - second candidate by rxlev - or other. for this
> case use "stick 746" option and check for network's answers (ImmAss or
> ImmAssReject).
> You can also try to use other SIMs.
>
> Thanks,
> Pavel
>
>
> On Mon, Apr 15, 2013 at 1:11 PM, Hoàng Mạnh Hùng <hunghm.vn at gmail.com>wrote:
>
>> Hi Pavel Baturko,
>>
>>
>> mobile.cfg, mobile.log, layer1.log and other logs in case of automatic
>> network selection "network-selection-mode auto" ans "no stick" option:
>>
>> root at UR:/tmp# telnet 127.0.0.1 4247
>> Trying 127.0.0.1...
>> Connected to 127.0.0.1.
>> Escape character is '^]'.
>> Welcome to the OsmocomBB control interface
>>
>> OsmocomBB> en
>> OsmocomBB# sho
>>
>> OsmocomBB# show ms
>> MS '1' is up, service is limited
>> IMEI: 357337016773249
>> IMEISV: 3573370167732490
>> IMEI generation: fixed
>> automatic network selection state: A0 null
>> cell selection state: PLMN search
>> radio ressource layer state: idle
>> mobility management layer state: MM idle, PLMN search
>>
>> OsmocomBB# show
>> OsmocomBB# show sub
>> OsmocomBB# show subscriber
>> Mobile Subscriber of MS '1':
>> IMSI: 452040399998391
>> ICCID: 89840403940099983911
>> Service Provider Name: VIETTEL
>> SMS Service Center Address: +84980200030
>> Status: U2_NOT_UPDATED IMSI detached LAI: invalid
>> Key: sequence 1 74 5d 70 bb 32 6a a0 00
>> Access barred cells: no
>> Access classes: C4
>> List of preferred PLMNs:
>> MCC |MNC
>> -------+-------
>> 452 |04 (Vietnam, Viettel Mobile)
>> 456 |08 (Cambodia, Viettel)
>> 457 |03 (Laos, Unitel)
>> 372 |03 (Haiti, 03)
>>
>> OsmocomBB# show
>> OsmocomBB# show sup
>> OsmocomBB# show support
>> Supported features of MS '1':
>> Phase 2 mobile station
>> R-GSM : yes
>> E-GSM : yes
>> P-GSM : yes
>> GSM900 Class : 4
>> DCS 1800 : yes
>> DCS Class : 1
>> GSM 850 : yes
>> GSM 850 Class: 4
>> PCS 1900 : yes
>> PCS Class : 1
>> GSM 480 : no
>> GSM 450 : no
>> CECS : no
>> VGCS : no
>> VBS : no
>> SMS : yes
>> SS_IND : yes
>> PS_CAP : no
>> CMSP : no
>> SoLSA : no
>> LCSVA : no
>> LOC_SERV : no
>> A5/1 : yes
>> A5/2 : yes
>> A5/3 : no
>> A5/4 : no
>> A5/5 : no
>> A5/6 : no
>> A5/7 : no
>> A5/1 : yes
>> Channels : SDCCH + TCH/F + TCH/H
>> Full-Rate V1 : yes
>> Full-Rate V2 : yes
>> Full-Rate V3 : no
>> Half-Rate V1 : yes
>> Half-Rate V3 : no
>> Min RXLEV : -106
>>
>> OsmocomBB# call 1 0987785050
>> OsmocomBB#
>> % (MS 1)
>> % Call has been rejected
>>
>> OsmocomBB# sms 1 0987785050 testSMS
>> OsmocomBB#
>> % (MS 1)
>> % SMS to 0987785050 failed: (MO) SMS rejected
>>
>> OsmocomBB# net
>> OsmocomBB# network sho
>> OsmocomBB# network show 1
>>
>> OsmocomBB#
>> % (MS 1)
>> % Trying to registering with network...
>>
>> % (MS 1)
>> % Trying to registering with network...
>>
>> % (MS 1)
>> % Trying to registering with network...
>>
>> % (MS 1)
>> % Searching network...
>>
>>
>> % (MS 1)
>> % Trying to registering with network...
>>
>> % (MS 1)
>> % Trying to registering with network...
>>
>> % (MS 1)
>> % Searching network...
>>
>> OsmocomBB# sms 1 0987785050 testSMS
>>
>> % (MS 1)
>> % Trying to registering with network...
>> call 1 0987785050
>> OsmocomBB#
>> % (MS 1)
>> % Call has been rejected
>>
>> OsmocomBB# sms 1 0987785050 testSMS
>> OsmocomBB#
>> % (MS 1)
>> % SMS to 0987785050 failed: (MO) SMS rejected
>>
>>
>> % (MS 1)
>> % Trying to registering with network...
>>
>>
>>
>> 2013/4/15 Pavel Baturko <pabftk at gmail.com>
>>
>>> Hi,
>>>
>>> Could you please provide mobile.log and log from VTY in case of
>>> automatic network selection "network-selection-mode auto" ans "no
>>> stick" option?
>>>
>>> Thanks,
>>> Pavel
>>>
>>>
>>> On Mon, Apr 15, 2013 at 10:46 AM, hungbangchu <hunghm.vn at gmail.com>wrote:
>>>
>>>> Hi,
>>>>
>>>> My attachment is file mobile.log.
>>>>
>>>> Any one can mobile.log
>>>> <http://baseband-devel.722152.n3.nabble.com/file/n4025987/mobile.log>
>>>> help
>>>>
>>>> me?
>>>>
>>>>
>>>>
>>>> pab wrote
>>>> > Hi,
>>>> >
>>>> >> There is no such command.
>>>> >> Error occurred during reading below line:
>>>> >> stick on
>>>> > 'stick' option should be used as 'stick ARFCN'. with this option your
>>>> MS
>>>> > will be forced to use specific ARFCN. Be sure that this ARFCN is
>>>> visible
>>>> > by
>>>> > your MS and owned by your SIM's service provider.
>>>> >
>>>> > Also I think it's difficult for people in this list to help you
>>>> without
>>>> > logs, at least attached mobile app log could help.
>>>> >
>>>> > Thanks,
>>>> > Pavel
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> View this message in context:
>>>> http://baseband-devel.722152.n3.nabble.com/Baseband-MS-1-is-up-service-is-limited-tp4025964p4025987.html
>>>>
>>>> Sent from the baseband-devel mailing list archive at Nabble.com.
>>>>
>>>>
>>>
>>
>>
>> --
>> Thanks and Best Regards
>> --
>> From: Hoàng Mạnh Hùng
>>
>
>
--
Thanks and Best Regards
--
From: Hoàng Mạnh Hùng
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20130416/ab022cad/attachment.html>
More information about the baseband-devel
mailing list