RSSI firmware

[Dario Lombardo]

Due to a minor issue in my cable the second solution didn't work.
I can confirm that both solutions work well.

On Wed, Feb 1, 2012 at 10:00 AM, Dario Lombardo <dario.lombardo at libero.it>wrote:

> sudo ./osmocon -p /dev/ttyUSB0 -m c123xor
> ../../target/firmware/board/compal_e88/loader.compalram.bin
> sudo ./osmoload memload 0x820000
> ../../target/firmware/board/compal_e88/monitor.highram.bin
> sudo ./osmoload jump 0x820000
>
> This solution works pretty well!
>
> ./osmocon -p /dev/ttyUSB0 -m c123xor
> -c ../../target/firmware/board/compal_e88/monitor.highram.bin ../../target/firmware/board/compal_e88/chainload.compalram.bin
>
> I'm not able to make this one working. The fw is downloaded but not run.
>
> monitor.highram.bin has been changed into rssi.highram.bin.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20120201/9a8114ed/attachment.html>