sercomm/osmocon cant send CMD after PROMPT1

[Nathan Fain]

On Sun, 14 Mar 2010 16:28:42 +0100, Holger Freyther <zecke at selfish.org>
wrote:
> On Sunday 14 March 2010 16:04:03 Nathan Fain wrote:
> Yes, we turn the file descriptor into non blocking mode and then the
write 
> might fail as we write too early. A patch to turn this code into to use
> the 
> write_queue would be totally nice... or at least respond to PROMPT from
> within  
> a ready write.

that is doable and i will see if I can contribute soon (weekends almost
over :/ ).

because i was on the python route I went ahead and wrote code all the way
through uploading.  I was expecting I would get a NACK but instead I get
neither a NACK nor ACK but the following response after uploading hello
world.  Just curious if anyone has ever seen this before:

?BDLENA time negative (%d)

BROWNOUT!1!ssd1783Error: CFI query signature not found
%08x size %08x
Locking down block at 0x%08x
Flash Manufacturer ID: %04x
Flash Device ID: %04x
Flash Size: 0x%08x bytes
Primary Algorithm ID: %04x
Primary Extended Query: %04x
Alternate Algorithm ID: %04x
Alternate Extended Query: %04x
Block Erase Typical: %u ms
Block Erase Maximum: %u ms
Word Program Typical: %u us
Word Program Maximum: %u us

-- 
cyphunk://cypherpoet.com
nathan://squimp.com
fain://deadhacker.com